DIY Wall Hangers
It’s been a little while since we posted these, but I wanted to RE-Post because these ball jars just went on sale again – and this would make a great summertime craft!
Hi! I’m Amber Anderson, I am a pastors wife, mom of 2 lovely boys, and an avid DIY’er. I post regularly about DIY projects, crafts and family life.
I decided this week I’m going to give out my little secret. (Ok, it’s not a secret, BUT I haven’t told my readers how to make it yet!) The how-to on my Etsy wall planters. I ship approximately 2 of these out a week thanks to my Etsy shop. Thank you Etsy.com for being the easiest place to sell homemade goods, ever! These are awesome little hangers that can be used for much more than plants or herbs; a lot of my customers use them in the bathroom for toiletries.
This DIY is a little bit different than my normal crafts because it involves some power tools! One thing I’m not the best at, so you’ll notice my handy husband in the pictures. 🙂 But if you like this look, go for it. It’s definitely worth the effort.
What you need:
- Old pallet or any other weathered wood
- Wide mouth Mason Jars
- 3.5-inch diameter metal clamp
- Screwdriver with drill bits
- Flat head screwdriver
1. Start with your pallet; we used a crowbar to separate the wood from the pallet.
2. Using your handsaw cut a plank of the pallet wood to the desired size, I usually make mine around 16 inches long.
After you have it the length you want, measure how where you want to place the jars. I like to keep mine 3 inches from each end and about a 1-2 inches apart. (If any of you are like me, this is the hardest part, I don’t specialize in mathematical measurements)
3. Drill hole in clamps to prepare for the screw, to do this I used a drill bit proportioned in size to the size screw I would be using to attach a clamp to wood. Below is what your hole would look like.
4. Once your holes are cut, drill your clamps in your measured areas. I would suggest using shorter screws to avoid poking out the back side of the wood.
5. Last step! Place your Mason jars in the clamps and tighten with a flat head screw driver.
Don’t worry if your measurements are off, just unscrew and try again. You can probably eye it better than you can measure.
If you are using these as planters; hang the plank where you want, put your soil in the jars separately, then tighten them into the clamps.
I love these planters. Enjoy!